CLP-106-630 DON JO LATCH PROTECTOR FOR NARROW STILE OUTSWINGING DOORS

Outswinging commercial doors are a primary target for intruders attempting to pry, jimmy, or jimmy-jack the latch bolt exposed in the door gap. The Don-Jo CLP-106-630 Commercial Latch Protector (Latch Guard) provides an ironclad physical barrier to completely shield your locking mechanism from tampering.

Specially designed for narrow stile outswinging doors—commonly found on aluminum storefronts, glass entryway doors, and office perimeters—this commercial-grade shield blocks access to the latch or deadbolt. It works seamlessly with standard lever handles, cylindrical locks, and push-bar panic exit devices.

Key Security & Design Features

• Tamper-Proof Fastening: Built with concealed welded studs on the back of the plate. This means there are no exposed bolt heads on the exterior of the door for intruders to cut, grind, or drill off.

• Ultra-Heavy 12-Gauge Steel: Stamped from 12-gauge (.104 thickness) stainless steel. It is incredibly rigid and engineered to resist heavy prying forces from crowbars or screwdrivers.

• Narrow Stile Profile: With a tailored 2-1/8" width, it easily mounts within the restricted surface area of narrow aluminum stile profiles without overlapping glass inserts or framing trim.

• Premium 630 Satin Stainless Finish: Features a sleek, modern architectural 630/US32D Satin Stainless Steel finish. It matches commercial hardware perfectly while providing excellent rust and corrosion resistance on exterior entryways.

Specifications

Heavy-Duty Through-Bolt Installation

Installing the CLP-110-630 creates a solid, unified defense across your door face:

1. Position the Guard: Place the guard on the exterior face of your outswing door, centering the shield directly over the latch line of your lock or exit device.

2. Mark & Drill: Mark the locations of the rear-welded studs on the door face. Remove the protector and drill clean through-holes at those points.

3. Bolt & Secure: Insert the studs through the drilled holes from the outside. Tighten the provided washers and nuts securely from the inside face of the door. Once clamped down, your latch is fully armored against physical attacks.